Transfer Cases

NP231 Transfer Case Jeep 89-95 Wrangler & Cherokee, W/ Slip Yoke Eliminator Kit

$2,092.89 USD

Item Specifics

Brand	GJSP
California Proposition 65	WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Rear Output Type	Bolt On
Shift Operation Type	Manual
Transfer Case Fluid Capacity	2
Transfer Case Fluid Included	No
Transfer Case Fluid Type	ATF +4
Technical Notes	NV231; NOT FOR STOCK APPLICATIONS, 23 Spline 0.75 Inch Exposed Length On Input Shaft, Bolt On Front Output Yoke, 1.75 Inch Diameter Speedo hole, 2 Pin Shift Indicator Switch Above Shift Lever, Built With a Slip Yoke Eliminator Kit With a 1310 CV Style Rear Yoke, WILL REQUIRE AN AFTERMARKET REAR DRIVESHAFT (not included), Tag Numbers: 52093497, 52097522, 52097695, 52097890, 52098362, 52098487, 52099695, 53005382, 53006096, 53008212, Hollander Numbers: 412-210, 412-309, 412-326, 412-328A, 412-328B, Other Numbers: UMT207-1
UPC	883584129677
Width	24.0 in
Length	18.0 in
Depth	34.0 in
Weight	74.0 lb

Product Details

Zumbrota Transfer Cases are rebuilt to unparalleled standards for confidence and satisfaction driving behind the wheel. Our expert craftsmen take pride in restoring each unit to ensure the utmost quality by diligently executing each step. Cases and internal components are thoroughly inspected and tested for signs of wear such as cracks, stripped threads, shaft straightness, gear wear and chain stretch. Zumbrota uses an exclusive Hydro-blast rinse and blasting procedure on internal and external parts, followed by a proprietary shot-enticed deep cleaning. Each unit is fully rebuilt with replacement of all bearings, seals, and viscous couplers. All finished units are thoroughly spun tested for shift-ability and noise. All transfer cases are shipped in high density plastic totes to eliminate damage in transit.

Units are shipped in high density plastic totes to help eliminate in-transit damage.
100% replacement of seals, bearings, viscous couplers (when applicable) and other common wear components.
All cases are cleaned utilizing our state of the art hydro blasting and rinsing process. This process is what brings all cases back to the OEM finish.
All units are quality inspected throughout the remanufacturing process to maintain our quality standard.